• +86-531-85965399
  • postmaster@jnyuandaboiler.com
  • Company Details

Jinan Yuanda Power Equipment Co.,Ltd.

All
  • All
  • Title
All
  • All
  • Title
HomeProducts

All Products (Total 685 Products)

Wind Turbine Gas Steam Turbine Generator Stator Bar
Wind Turbine Gas Steam Turbine Generator Stator Bar Coil is mainly works based on a spinning electromotive device configuration like the field magnet or the armature. The field magnet is used to communicate with the armature to produce motion whereas the armature gets its influence from moving field coils on the...
High Low Voltage Electric Motor Stator Bar Coils
High Low Voltage Electric Motor Stator Bar Coils, used for gas water steam turbine generator, wind turbine. Coil voltage class: 3.3kV, 6kV, 10kV, 10.5kv. Coil heat resistance grade: B, F, H. The inter turn insulation of class F AC motor has always been concerned and valued by the company, striving to find a kind of...
1.4832 1.4837 Heat Resisting Steel Castings Grate Block
DIN 1.4832 1.4837 1.4848 1.4865 1.4857 1.4855 1.4849 1.4852 2.4778 2.4879 Grade Heat Resisting Steel Castings Grate Bar/Grate Block/Grate Plates. With over 100 years of operation experience, the moving grate incineration system has a long track record of operation for mixed MSW treatmentMain Technical...
Austenitic Steel Heat Resistant Steel Castings Spare Parts
Heat resistant steel castings are also referred to as oxidation resistant steel castings, refractory steel castings, heat resisting stainless steel castings.Heat resistant steel is a kind of alloy steel that has higher mechanical strength and better chemical stability at high temperatures.Heat resisting steel castings...
EN1.4740 GX40CrSi17 Fire Grates with Chromium Nickel Alloy
EN1.4740 GX40CrSi17 Fire Grates with High Chromium Nickel AlloyEN 10295: 2002 1.4710 ( EU (EN)GX30CrSi7)/1.4729( GX40CrSi13)/1.4740(GX40CrSi17)/1.4745( GX40CrSi24)/1.4776(GX40CrSi28)/1.4777(GX130CrSi29)/1.4743( GX160CrSi18)/1.4823( GX40CrNiSi27-4)/1.4825(GX25CrNiSi18-9)/1.4826(GX40CrNiSi22-10 ) Heat resistant steel...
OEM Cast Grate Bar Biomass Incineration Casting Grate
OEM Casting Grate Bar Biomass Incineration Casting Grate EN 10295: 2002 1.4710 ( EU (EN)GX30CrSi7)/1.4729( GX40CrSi13)/1.4740(GX40CrSi17)/1.4745( GX40CrSi24)/1.4776(GX40CrSi28)/1.4777(GX130CrSi29)/1.4743( GX160CrSi18)/1.4823( GX40CrNiSi27-4)/1.4825(GX25CrNiSi18-9)/1.4826(GX40CrNiSi22-10 ) Heat resistant steel castings...
Heat Resistant Cast Biomass Incineration Waste Fire Grates
Heat Resistant Casting Biomass Incineration Waste Fire Grates EN 10295: 2002 1.4710 ( EU (EN)GX30CrSi7)/1.4729( GX40CrSi13)/1.4740(GX40CrSi17)/1.4745( GX40CrSi24)/1.4776(GX40CrSi28)/1.4777(GX130CrSi29)/1.4743( GX160CrSi18)/1.4823( GX40CrNiSi27-4)/1.4825(GX25CrNiSi18-9)/1.4826(GX40CrNiSi22-10 ) Heat resistant steel...
1.4825 Step Moving Fire Grate Waste Incineration Grates
1.4825/1.4823 Heat Resistant Casting Steel Step Moving Fire Grate Waste Incineration Grates EN 10295: 2002 1.4710 ( EU (EN)GX30CrSi7)/1.4729( GX40CrSi13)/1.4740(GX40CrSi17)/1.4745( GX40CrSi24)/1.4776(GX40CrSi28)/1.4777(GX130CrSi29)/1.4743( GX160CrSi18)/1.4823(...
1.4729 GX40CrSi13 Cast Steel Waste Incineration Grate Bars
1.4729 GX40CrSi13 Cast Steel Waste Incineration Grate Bars EN 10295: 2002 1.4710 ( EU (EN)GX30CrSi7)/1.4729( GX40CrSi13)/1.4740(GX40CrSi17)/1.4745( GX40CrSi24)/1.4776(GX40CrSi28)/1.4777(GX130CrSi29)/1.4743( GX160CrSi18)/1.4823( GX40CrNiSi27-4)/1.4825(GX25CrNiSi18-9)/1.4826(GX40CrNiSi22-10 ) Heat resistant steel...
EN1.4710 GX30CrSi7 Cast Stainless Steel Cast Fire Grate
EN1.4710 GX30CrSi7 Cast Stainless Steel Cast Fire Grate EN 10295: 2002 1.4710 ( EU (EN)GX30CrSi7)/1.4729( GX40CrSi13)/1.4740(GX40CrSi17)/1.4745( GX40CrSi24)/1.4776(GX40CrSi28)/1.4777(GX130CrSi29)/1.4743( GX160CrSi18)/1.4823( GX40CrNiSi27-4)/1.4825(GX25CrNiSi18-9)/1.4826(GX40CrNiSi22-10 ) Heat resistant steel castings...
Fluidized Bed Steam Boiler Parts Air Distribution Caps
CFB Boilers Furnace High Temperature Heat Resistant Boiler Blast Air Distribution Caps for Fluidized Bed Steam Gas Boiler PartsThe cover and inner tube of nozzle were installed with screw thread, and there was screw thread deformation and tilting of the inner tube, as the environment in the furnace area is harsh after...
Boiler Tube Half Round Pipe Erosion Shields
The half round shields (Boiler Tube Half Round Pipe Erosion Shields) are produced by utilizing a high pressure press and professional mold pressing. Half round shields with bend are formed by bending with a special abrasive on a tube bender. The shields are mostly used on the windward side of the heating surface of...
Boiler Casting Parts Tube Protection Erosion Shields

Unit Price: USD 5 / Piece/Pieces

Min.Order Unit Price
100 Piece/Pieces USD 5 / Piece/Pieces

Brand: Jinan Yuanda

Packaging: Steel Frame or Plywood Export Package Depends on Size

Supply Ability: 1000T/Month

Min. Order: 100 Piece/Pieces

Model No.: Customized

Boiler Casting Parts Tube Protection Erosion Shields, also known as tubing inserts,anti-corrosion Shields, anti-wear plate, anti-wear protection Shields, anti-wear cover plate, anti-corrosion cover plate, boiler climbing pipe, anti-wear pressure plate, etc. , which are used in combination with snap rings.Boiler Tubes...
CFBC Fluidized Bed Chamber ZG4Cr26Ni4Mn3NRe Air Cap Furnace
CFBC/CFB Fluidized Bed Boiler Air Chamber ZG4Cr26Ni4Mn3NRe Air Cap FurnaceBoiler Fitting Oil Boiler Nozzle Replacement (Boiler Furnace Nozzles,Boiler Oil Nozzles) is a device designed to control the direction or characteristics of a fluid flow (especially to increase velocity) as it exits (or enters) an enclosed...
Boiler Tube Protection Shield for Boiler Tube Pipe
Boiler Tube Protection Shield for Boiler Tube Pipes Erosion Shields are used to protect boiler tubing from the highly erosive effects of high temperatures and pressures thereby greatly extending tube life.Snap rings for tubes erosion shields.Main Technical Parameter:Material...
1.4823 Garbage Incinerator Heat Resistant Steel Gratebar
EN 10295: 2002 1.4710 ( EU (EN)GX30CrSi7)/1.4729( GX40CrSi13)/1.4740(GX40CrSi17)/1.4745( GX40CrSi24)/1.4776(GX40CrSi28)/1.4777(GX130CrSi29)/1.4743( GX160CrSi18)/1.4823( GX40CrNiSi27-4)/1.4825(GX25CrNiSi18-9)/1.4826(GX40CrNiSi22-10 ) Heat resistant steel castings heat resistant casting steel incineration technology is...
Thermal Waste Heat Resistant Casting Steel Grate Bar
EN 10295: 2002 1.4710 ( EU (EN)GX30CrSi7)/1.4729( GX40CrSi13)/1.4740(GX40CrSi17)/1.4745( GX40CrSi24)/1.4776(GX40CrSi28)/1.4777(GX130CrSi29)/1.4743( GX160CrSi18)/1.4823( GX40CrNiSi27-4)/1.4825(GX25CrNiSi18-9)/1.4826(GX40CrNiSi22-10 ) Heat resistant steel castings heat resistant casting steel incineration technology is...
Threaded Pipe Fitting Steel Pipe Plugs and Caps
Steel Pipe End Caps are the pipe fittings,Stainless Steel Plug,Stainless Steel Hex Head Plug,Stainless Steel Square Head Plug,Stainless Steel Round Head Plug, provide stainless steel pipe fittings for pipeline industry,which is mainly based on gas,oil,chemical,mechanical,shipbuilding and other area.mainly steel...
Internal External Thread Stainless Steel Pipe End Caps
Steel Pipe End Caps are the pipe fittings, which are mainly used as a plug to cover the end of a pipe. We can supply pipe end caps in standard sizes, as well as in accordance with a specification of our customers as per international standards.Various grades of pipe caps manufactured includes 304/304L, 316/316L, 321,...
Stainless Steel Tube End Plugs
Stainless Steel Tube End Plugs And Caps are the pipe fittings, which are mainly used as a plug to cover the end of a pipe. We can supply pipe end caps in standard sizes, as well as in accordance with a specification of our customers as per international standards.Various grades of pipe caps manufactured includes...
Power Plant Boiler Spare Parts Erosion Shields Tube
Power Plant Boiler Spare Parts Erosion Shields Tube Boiler Tubes Erosion Shields, also known as anti-corrosion Shields, anti-wear plate, anti-wear protection Shields, anti-wear cover plate, anti-corrosion cover plate, boiler climbing pipe, anti-wear pressure plate, etc. , which are used in combination with snap rings....
1.4823 Grate Elements for Waste Incineration Power Plant
1.4823 Boiler Grate Bars Grate Stoker Parts Grate Elements for Waste Incineration Power Plant Refuse Burning Components 1.4777 1.4776 1.4823 1.4729 Cast Steel Boiler Grate Heat-resistant solid metal as used for furnace components difficulty to greater mechanical stress. In this case as a grate bar. ormally for warmth...
Heat Resistant Cast Steels Boiler Parts Chain Grate
1.4777 1.4776 1.4823 1.4729 Cast Steel Boiler Grate Heat-resistant solid metal as used for furnace components difficulty to greater mechanical stress. In this case as a grate bar. ormally for warmth resitant solid pieces, for instance portable oven and burning parts, gates, tracks, rolls, burning jets, shapes for...
Straight Bend Type Boiler Tubes Erosion Shields

Unit Price: USD 1 / Piece/Pieces

Min.Order Unit Price
1 Piece/Pieces USD 1 / Piece/Pieces

Brand: Jinan Yuanda

Packaging: Steel Frame or Plywood Export Package Depends on Size

Supply Ability: 1000T/Month

Min. Order: 1 Piece/Pieces

status: New

The cross-sectional shape of Straight Bend Type Boiler Tubes Erosion Shields is mostly semi-circular (180 degrees), and there are also 120-160 degrees. It is mainly used on finned tubes (water-cooled walls); boiler tube erosion shields are divided into direct wear-resistant shields, in-curve, anti-wear shields,...

New Products

Home > Products

Home

Product

Whatsapp

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send